In the deep, dark world beneath the oceans, there are mountains, valleys, plateaux and volcanoes. Anyone who needs to navigate marine areas needs to know what lies below the surface of the ocean.
Hydrography is the science that deals with the measurement and description of the physical features below the surface of the sea. A hydrographic survey can be done to record these features.
A hydrographic survey may be done for:
- nautical charting.
- port and harbour maintenance e.g. dredging.
- coastal engineering.
- coastal zone management.
- offshore resource development eg drilling for oil and gas.
The one piece of information common to all hydrographic surveys is water depth. Also of interest is the nature of the sea-floor (ie is it sand, mud or rock?). This is important to know for:
- anchoring
- dredging
- building
- constructing pipelines and placing cables
- fisheries habitat.
Hydrographic surveys are most often used for nautical charting to help navigate at sea.
Nautical Charting
A nautical chart is a graphic representation of a maritime area and adjacent coastal regions. Depending on the scale of the chart, it may show:
- depths of water and heights of land (topographic map).
- natural features of the seabed.
- details of the coastline.
- navigational hazards eg reefs.
- locations of natural and human-made aids to navigation eg islands, lighthouses.
- information on tides and currents.
- human-made structures such as harbours, buildings, and bridges.
Nautical charts are essential tools for marine navigation; many countries require vessels, especially commercial ships, to carry them. Nautical charting may take the form of charts printed on paper or computerised electronic navigational charts.
Technology
Nautical charts are based on hydrographic surveys. As surveying is difficult and time-consuming, hydrographic data for many areas of sea may be old and not always reliable.
Depths are measured in a variety of ways. Historically the sounding line was used. In modern times, echo sounding is used for measuring the seabed in the open sea. Echo sounding is the technique of using sound pulses to find the depth of water. The interval from the emission of a pulse to reception of its echo is recorded, and the depth calculated from the known speed of sound waves through water.
Depths which have been measured are indicated by the numbers shown on the nautical chart. Depths on charts published in most parts of the world use metres. Older charts, as well as those published by the United States government, may use feet or fathoms.
Depth contour lines show the shape of underwater relief. Coloured areas of the sea emphasise shallow water and dangerous underwater obstructions. Depths are measured from the chart datum, which is related to the local sea level. The chart datum varies according to the standard used by each country. In general, the move is towards using Lowest Astronomical Tide (LAT), the lowest tide predicted in the full tidal cycle, but in non-tidal areas and some tidal areas Mean Sea Level (MSL) is used instead.
The New Zealand Nautical Almanac (NZ 204) is published annually by LINZ. It provides official information to aid safe navigation in New Zealand waters.
LINZ also provides information on tides and sea levels.
You can see what the seafloor looks like here and you can check out this 3D dynamic view provided by LINZ.
